Change Ur IP Address in Less Than 30 Sec!!!

The following is a guide on how to change your IP in 30 seconds or less. This can be used if your IP has been banned from a game server, or on gunbound if your IP get's blocked. I've tried this on both Windows XP and Windows 2000, and it has worked:

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address



*Note* This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back.

Saving flash games off websites

many of us must have played flash games on the net and would have wanted them on our PC. Well here's the trick to get em.
you will need

1. Mozilla Firefox :)



in the game window, after the game has completed the loading process, click Tools> Page Info and go to the media tab. under media, scroll down to see the embedded media file with a .swf extension. normally the file name is given in italics. Select that and click save as and save it to the desired location. then to open it, right click the file in its location and select open with. select firefox and enjoy ur game offline!! :)

Lock folders without softwares

Suppose you want to lock the folder movies in D: which has path D:\Games .

Open notepad and type

ren Games Games.{21EC2020-3AEA-1069-A2DD-08002B30309D}

Now Save this text file as "Location.bat" in the same drive [ D:\ ]

Now Open notepad again and type

ren Games.{21EC2020-3AEA-1069-A2DD-08002B30309D} Games

Now save this text file as "Key.bat" in the same drive

Now two batch file are created Location and Key.Press Location and the folder will change to control panel such that you cannot view its Contents .Press key and you'll get back your original folder .



You can also change the folder in to


Inbox
{00020D75-0000-0000-C000-000000000046}


Microsoft Network
{00028B00-0000-0000-C000-000000000046}
------------------------------------------------------------------------------------------------
Programs Folder
{7be9d83c-a729-4d97-b5a7-1b7313c39e0a}


Start Menu Folder
{48e7caab-b918-4e58-a94d-505519c795dc}


Network Computers
{1f4de370-d627-11d1-ba4f-00a0c91eedba}
-------------------------------------------------------------------------------------------------
My Computer
{20D04FE0-3AEA-1069-A2D8-08002B30309D}


My Network Places
{208D2C60-3AEA-1069-A2D7-08002B30309D}



Network Connections
{7007ACC7-3202-11D1-AAD2-00805FC1270E}


Printers and Faxes
{2227A280-3AEA-1069-A2DE-08002B30309D}
-------------------------------------------------------------------------------------------------
Recycle Bin
{645FF040-5081-101B-9F08-00AA002F954E}


Scanners and Cameras
{E211B736-43FD-11D1-9EFB-0000F8757FCD}


Scheduled Tasks
{D6277990-4C6A-11CF-8D87-00AA0060F5BF}


Web Folders
{BDEADF00-C265-11d0-BCED-00A0C90AB50F}
-------------------------------------------------------------------------------------------------

You can also hide a folder in the following way

Rename the folder by typing (alt+0160). Now go to the properties and then customize option then change the icon as blank.The folder will become invisible.You can get back the folder contents by clicking the blank space

To make the folder visible again rename the folder

Note:-For the keyboard combination (alt+0160) the numbers 0160 should be pressed from the number pad located at the right side of the keyboard.

To hide your folders without the usage of folder lock :

Suppose u want to hide a folder named "Movies" which is in D: drive of your computer

Go to command prompt
start--->run--->cmd-->d:

After changing the path from C: to D:

Type D:/>attrib +h +s Movies
Action: The above command is used to hide the folder "Movies"

To show the folder

Type D:/>attrib -h -s Movies
Action:The above command will make the folder "Movies" visible 

Gtalk trick-How to open Multiple gtalk windows???

Gtalk trick-How to open Multiple gtalk windows???
1. Right-click GTalk shortcut and select Properties.
2. The shortcut properties dialog box as shown below should popup.
3. Just add /nomutex to the existing text
Eg: "C:\Program Files\Google\Google Talk\googletalk.exe"
/nomutex
4. Now you can launch multiple windows and use different ID's.

Cheers!!

WRITING X-BOX ;GAMECUBE GAMES using cd-rom

BURNING X-BOX & GAMECUBE GAMES USEING CDRWIN
----------------------------------------

--------------
1) Insert your original in your CD-ROM.
2) Open CDRWin (or any other image extractor) to make an iso image of the game
on your hard disc. Click on 'Extract Disc/Tracks/Sectors'
3) Here are the settings which work for me (!):
Disc Image/Cue sheet
File-Format: Automatic
Reading-Options:
RAW, CD+G, CD-TEXT and MCN/USRC all Unchecked
Error Recovery: Ignore
Jitter Correction: Auto
Subcode Analyses: Fixed
Data-Speed: MAX
Read Retry Count: 10
Audio Speed: MAX
Subcode Threshold: 900
There are a lot of reports, that Raw reading also works, but I had problems with it enabled.
4) Click on 'Start'
--------------------------------------------------------------------------------
RECORDING TO A DISC
--------------------------------------------------------------------------------
1) Install Fireburner

2) Double click on the Cue File For The Game
3) Right Click And select burn To CD
That?s all there is record DAO, and you can try to burn it fast at 2X
Using PNY Black Diamond CDR'

Free Calls With Yahoo !!!

guys...u'll be having some trouble getting connected to the free calls thing, but after trying it for some time u'll get connected for sure...

hello all .. make free call on yahoo any ware 1st call this number in yahoo messenger

+18003733411when play the recording choose free call and then dial the number

country code 1st and enjoy...............


its all the VOICE basic Command use ur voice to activate FREE calls...


hear the instruction's of that ladies who is instructing u ............


when she start saying the menu :



say FREE CALL -----> thn -----> when she start giving u instructional abt the free call nd onces she said dial ur destination number U.S.A code 1 .. at this moment u have to dial the destination number nd wait for couple of seconds

SPEED UP UR ACROBAT READER (ALMOST LIKE NOTEPAD)

 This is an incredible trick which everyone will be in need of, in thier day-to-day life...just check this out...

 

1. Go to the installation folder of acrobat reader
(C:\program files\adobe\acrobat\reader\.. whatever)

2. Move all the files and folders from the "plugins" directory to the "Optional" directory. (I repeat.. cut and paste the files NOT copy & paste).

Also make sure that acrobat reader is not open else it will lock the files and not allow you to move the files).

Now your acrobat reader will load very fast and almost as good as notepad..

Note: I am assuming that you've installed Acrobat Reader in C Drive

RechargeItNow: Recharge Prepaid Mobile ONLINE -

well friends, u can recharge ur mobile online too...everytime v'll have to walk to the shops for getting our recharge done..but y not v sit at home itself, and do the job if v have a net connection...the process is simple and is explained below[read more..]

Want to compose mails from mobile without GPRS??

Its very easy with MyToday Mail-on-Mobile[http://m3m.in]
No software downloading, no installation or no special handsets required.
Just SMS MAIL START to 575758.
Go to your email account (gmail, yahoo.in, indiatimes or your corporate mailing solution) & forward a copy of your mails to 91(your mobile no.)@m3m.in
This will ensure that you start receiving mails.
To reply you need to set your "From ID" which is the email id from which recipients will receive your mails.
To set " From ID" login to www.m3m.in with your mobile no. & password & set it.
Thats all!!!
You are now ready to compose mails right from your mobile anytime!!!!

Nokia 5800 Firmware Update Version v40.0.005

The Nokia 5800 has started to receive a firmware update, taking it from version 31.0.101 and we’re happy to say this is something a little more than a service update. Is this the update we’ve all been waiting for that will bring kinetic scrolling and the same UI as the Nokia X6 and Nokia 5530 XpressMusic? Join us after the jump to find out more about the Nokia 5800 firmware v40.0.005 update…

The Nokia 5800 has sold over eight million handsets in the 11 months it has been on-sale and in recent months owners have been getting a little vocal about updates – largely the fact that we hadn’t seen one for a while and that the device still lacked kinetic scrolling.

Check out our Nokia 5800 review

Well, the good news is that the Nokia 5800 Firmware Update Version v40.0.005 brings with it not only the much wanted/needed kinetic scrolling update but also gives users the same Homescreen that has been seen on the Nokia X6 and Nokia 5530 XpressMusic smartphones. This means you’ll be able to add up to 20 contacts using the scrolling Contact bar, as well as have a far more optimised homescreen.

We’ve not had our update yet but are waiting eagerly for it to appear. In the meantime, check out the changelog and if you’ve already received the update, let us know if you’ve noticed anything different, in the Comments below.

Nokia 5800 Firmware v40 Changelog:

* Kinetic scrolling

* Home style widget with Nokia 5530

* if you rotate the phone horizontally, it automatically activates the QWERTY keyboard

* Refresh Icons “Sharing Online”, “Configuring Accessories”, “Configure Phone”

* Improved application “Updating Applications”, which also renames Upgrade SW

* The application “Data transfer” was also implemented in “Settings”

* Real Player Updated

* Touch more responsive

* Slide to Unlock during call

* Improved stability

* New contact & music widget

* Kinetic Scrolling is not available in main menu, application menu, browser.

* Home Screen similar to that of Nokia 5530

* Removed the alphanumeric keypad in landscape version, now when we turned the phone alphanumeric portrait changes to full qwerty

* New screen alarm, but only when the screen is locked

* New screen incoming call, also only when the screen is locked

* Ovi Contacts installed

* In the settings menu there is a new icon for ‘Phone Switch’

How to avoid getting charged with cyber crime

Some of these are really more directed at new-comers to the scene since most experienced hackers learn these by trial and error.

::Always use a proxy::

Pretty simple, this is your no.1 defense against getting tracked down since your IP is like a fingerprint. If they have an IP they have an ISP, if they have a warrant

they have name, number, address, credit card number and everything that you have given your ISP. Proxys and VPNs are a hackers best friend...so get to know how to use them and never forgot them.[read more...]

View Contents of Rar before Download

Most of the files we download from the Internet are in Zip or Rar format. We wouldn’t like if we download an archive to find that the file we are looking for is not there. And it is also such a waste of Bandwidth and time to download a whole archive just for a single file. Archview is a Firefox addon that lets you preview the contents of an Archive before downloading. And using it[read more....]

Adsense Stopped Accounts In India

Its A Very Sad News To Share

Adsense Stopped Approving New Accounts To India Neither You Can Change It From Some other Country To India
Basically It Means No More Accounts For Indians

The Only Way To Get An Account Is Make A Blog Now Keep Updating It A Little Bit For Six Months

And After 6 Months You Might Get An Account With That Blog

And Even Pakistan Is Also Added To The List Of Those Countries Where You Cannot Change Payee Name Neither Address And 6 Months Restriction Is Also Applied I Think

No sure For The Last Point

But Indeed a Very Sad News

Access orkut without proxy site

How to access blocked or restricted orkut or any site with proxy but without using any proxy servers for free.

A lot of people had been asking to access orkut when even the proxy sites are banned so here is the method.

In order to access blocked or restricted orkut without using any proxy servers you need a proxy or anonymous program like JAP(JAP — ANONYMITY & PRIVACY).

How JAP Works ?

It acts as a local proxy between the browser and the insecure Internet. All web pages requested by the browser go directly to JAP, and are multiply encrypted and request goes through a mix cascade being formed by the user itself.

1. Firstly download JAP from here and install it.

http://anon.inf.tu-dresden.de/download_en.html

2. Disable the windows firewall Control Panel>>Windows Firewall (Select the OFF option to disable the firewall ) or disable any other firewall if installed on your system.

Note: If you don’t have any firewall ignore the step 2.

3. Start JAP and Complete Start Up wizard by first selecting the language.

3.1 Now click next and select the green option among the radio buttons in the next two upcoming screens.

3.2 Now just click next and next to simply end the wizard.

4. Configuring your browsers

4.1 For Internet Explorer

a) In Menu Bar of IE, Go To Tools>Internet Options and click the Connections Tab.

b) Click Lan Settings and Select the Check box which says “Use a Proxy server for your Lan” and Enter the follwing info in the boxes.

c) Address: 127.0.0.1 , Port: 4001

d) Click ok.

4.2 For Firefox

a)Go to the menu bar “Tools”, choose the submenu “Options”. The settings window will open. Choose the “Advanced” category and then the tab “Network”

b) To change the proxy server, click on the “Settings…” button. In the new window that opens, choose “Manual proxy configuration”. Activate “Use this proxy server for all protocols” and enter “127.0.0.1″ as the server and “4001″ as the port (without the quotation marks).

c) Click ok.

5. On the JAP Interface Click on the Services Drop Box

Note: This software allows to you to use Mix Cascades both ways by paying money and for free also so Don’t select cascades with cost as they will ask for money.

So Select any of the network in the Mix cascades without costs or Single Mixes and check the connectivity status(As shown Below the anonymity meter should be above ok or above it and if it is not try other network from the list).

6. Thats it. Done!

Now Open the Browser(IE Or FireFox) which you have configured previously and access orkut by simply entering the url www.orkut.com and it will be accessible with complete functionality .

Speed up Mozilla Firefox about 3-30x Faster!!!

If you are using firefox like me then you should try this.

1. Type "about:config" into the address bar and hit return. Scroll
down and look for the following entries:

network.http.pipelining
network.http.proxy.pipelining
network.http.pipelining.maxrequests

Normally the browser will make one request to a web page at a time.
When you enable pipelining it will make several at once, which really
speeds up page loading.

2. Alter the entries as follows:

Set "network.http.pipelining" to "true"

Set "network.http.proxy.pipelining" to "true"

Set "network.http.pipelining.maxrequests" to some number like 30. This
means it will make 30 requests at once.

3. Lastly right-click anywhere and select New-> Integer.
Name it "nglayout.initialpaint.delay" and set its value to "0".
This value is the amount of time the browser waits before it acts on information it receives.

4.After altering the entries given above close the firefox window and restart.

If you're using a broadband connection you'll load pages 2-30 times faster now.

Unlimited Downloading from MegaUpload, Only for Firefox users

Now you can see what's hidden If you're using Firefox, there is an add-on that allows you to bypass the MegaUpload "problem" where it says your country slots are full, or you have downloaded too much within a certain amount of time.

It's called MegaUpload SX.3.2, and with this add-on, you can download more than two or three links at the same time from MegaUpload.

This add-on works with Mozilla 1.5 to 2.x.x

https://addons.mozilla.org/es-ES/firefox/addon/3843

GET FREE EBOOKS..

A site where u get a lot of ebooks regarding all subjects..

http://ebooksgo.blogspot.com/

u'll get books for gmat,TOEFL ,SAT EBOOKS too...